Our surface treatments have been specially designed to tackle mould and damp. They should be an essential part of every builder’s toolkit as they can help to save both time and money.
The No More Mould Additive can be mixed with any paint type to create an anti-mould treatment. It is an easy and effective way of treating and protecting against the growth of mould. This is a great choice for both builders and other individuals from the general public. For the best results, this product should be combined with 5 litre of paint for an evenly distributed mixture.
Call us 0845 400 6666
Email us or fill in the form below
A damp proof membrane kit for waterproofing all wall and floor surfaces. This product enables the contractor to create a sealed system for use in basement conversions and renovation projects and can be used on wall and floors.
Call us 0845 400 6666
Email us or fill in the form below
A waterproof membrane kit for use on damp walls. The dry mesh kit is ideally used in all damp situations and can be fixed on top of existing brickwork, renders, paintwork etc. Presents tough mesh surface for direct application of various plaster finishes or adhesive dabs for plasterboard.
Call us 0845 400 6666
Email us or fill in the form below
With its unique thixotropic consistency and excellent water repellent properties on a range of building materials, DRYSEAL stands out. As opposed to conventional liquid products, DRYSEAL can be applied in just one working operation to achieve the desired loadings for maximum effectiveness. Dependent on porosity, the effective siloxane ingredient penetrates the substrate within a short time (30 minutes to several hours) where it reacts to become a polymer silicone resin.
Call us 0845 400 6666
Email us or fill in the form below
Enviroseal is an effective water repellent liquid based on a solvent free silicone/siloxane emulsion for use above ground on porous brickwork, cement renderings, asbestos, cement/mineral boards, unglazed tiles, cast concrete, roughcast, stonework (including calcareous materials, i.e. those containing limestone), wood, canvas and leather. Surfaces treated with Enviroseal remain permeable to vapour so that moisture within the structure does not remain trapped.
Call us 0845 400 6666
Email us or fill in the form below
A water based floor coating in grey or clear, two-pack, easy to apply resin systems with excellent adhesion to concrete, wood and other surfaces providing attractive, hard wearing dust-free finishes. Floors become easier to clean with an impervious finish and are substantially more resistant to damage by fork-lift trucks, chemicals, fuels and lubricants etc.
It can be applied to new (green) concrete, 7 days after being poured.
Call us 0845 400 6666
Email us or fill in the form below
The Mould Eradication Kit is designed to kill mould growth on walls, ceilings, window reveals, frames, doors, skirting boards etc.
Call us 0845 400 6666
Email us or fill in the form below
The Ultracure DIY Damp Proof Kit has everything you need to provide a safe new chemical damp proof course.
Requires no specialist equipment. Simple and quick Damp proofing cream injection. Non-hazardous active ingredients migrate through the bed joints to form an effective damp proof course. Highly effective damp proofing for DIY and Trade.
Call us 0845 400 6666
Email us or fill in the form below
1 Litre Pro damp proofing cream, part of a kit for professional contractors. Contains everything needed for a safe chemical damp proof course.
Simple and quick DPC injection. Non-hazardous active ingredients migrate through the bed joints to form an effective damp proof course. Highly effective damp proofing for DIY and Trade.
Call us 0845 400 6666
Email us or fill in the form below
Dampstop is a studded polypropylene damp proofing membrane. It is fixed to damp, salt contaminated walls using plugs, with the studs facing the wall, which creates an air group. The mesh can be dot and dab plaster boarded or directly rendered.
Dampstop creates a warm wall to reduce condensation and creates a barrier against harmful salt.
Call us 0845 400 6666
Email us or fill in the form below
Technoseal DPM is a general-purpose damp proofing paint and liquid tanking that can be applied to most sound surfaces by brush, roller or spray. Non-toxic, non-hazardous and solvent free formulation that can be applied to damp walls above and below ground.
Call us 0845 400 6666
Email us or fill in the form below